Metallizing Wire

For your convenience, we have listed various industrial specifications applicable to our products. These specifications are intended as a reference only and not for determining, if required, Powder Alloy Corporation source approved products. We encourage you to CONTACT our customer service manager for specific Powder Alloy Corporation source approvals.

PAC Alloy #Competitors ProductApplicationSpecificationNominal Chemistry 
PAC 1000TI
Tafa 14T
Coating is used in aircraft engines and as an overlay for medical implants.
Carbon
Hydrogen
Iron
Nitrogen
Oxygen
Titanium
0.08 Max.
0.005 Max.
0.10 Max.
0.12 Max.
0.10 Max.
Balance
PAC 912W
Tafa 74MXC
Coating is self bonding as general purpose, medium hardness, tough and wear resistant.
Aluminum
Molybdenum
Nickel
7.25
6
80.0 Min.
PAC 909W
Metco 405 Tafa 79B
Coating is dense, high temperature and oxidation resistant. Bonds better than Molybdenum.
Aluminum
Nickel
17.0-27.0
Balance
PAC 908W
Tafa 73MXC
Coating is self bonding, high oxidation resistance and good machinability.
Aluminum
Chrome
Nickel
17.0-27.0
18
70.0 Min.
PAC 906W
Tafa 75B
Coating is self bonding onto clean and smooth metallic surfaces. Coating is dense, tightly adherent and oxidation resistant.
Nickel
Aluminum
95
5
PAC 718W
Tafa 78T
Coating is identical in chemistry to IN 718. High temperature resistance to a variety of acidic and chloride environments. Excellent oxidation resistance up to 1800 degrees Fahrenheit.
Aluminum
Chrome
ColumbiumA
Iron
Molybdenum
Nickel
Titanium
APlus Tantalum
0.5
19
32
Balance
3.05
5
0.95
PAC 625W
Tafa 71T
Coating is identical in chemistry to IN 625. Used in applications requiring high temperature resistance to a variety of corrosive environments.
Aluminum
Carbon
Chromium
Cobalt
ColumbiumA
Iron
Manganese
Molybdenum
Nickel
Silicon
Sulfur
Titanium
APlus Tantalum
0.40 Max.
0.10 Max.
20.0-23.0
if determined
3.15-4.15
5.0 Max.
0.50 Max.
8.0-10.0
Balance
0.50 Max.
.015 Max.
.040 Max.
PAC 600W
Metco Metcoloy 33
A high machinable alloy suitable for wear and corrosion resistance.
Chrome
Iron
Nickel
15.5
8
Balance
PAC 420W
Metco Metcoloy #2 Tafa 60T
A high Chromium Stainless Steel alloy that provides excellent wear qualities that corrosion resistance.
Carbon
Chrome
Iron
Nickel
Silicon
0.35
13
Balance
0.5
0.5
PAC 400W
Tafa 70T
Coating is a Montel deposit that exhibits corrosion and load bearing resistant surfaces particularly in seawater and caustic environments. Coating is easily machinable.
Aluminum
Carbon
Copper
Iron
Manganese
Nickel
Silicon
Sulfur
0.5 Max.
0.15 Max.
28.0-34.0
1.0-2.5
1.5 Max.
Balance
0.5 Max.
0.2 Max.
PAC 276W
Metco 8276 Tafa 77T
Coating has excellent resistance to stress corrosion, cracking and chlorine environments through 1800 degrees Fahrenheit.
Chrome
Iron
Molybdenum
Nickel
Tungsten
15.5
5.5
16
Balance
3.75
PAC 308W
Tafa 80T
Coating is used as an overlay over a variety of 300 series Stainless. Moderate resistance to general corrosion, dimensional restoration and print rolls.
Carbon
Chromium
Copper
Manganese
Molybdenum
Nickel
Phosphorus
Silicon
Sulfur
0.08 Max.
19.5-22.0
0.75 Max.
1.0-2.5
0.75 Max.
9.0-11.0
0.03 Max.
0.30-0.65
0.03 Max.
PAC 200W
Tafa 06T
Exhibiting protection at high temperatures, coating is beneficial as an overlay.
Nickel
99.0 Min.
PAC 98W
Tafa 06C
Coating is bright and resistant to oxidation, corrosion and heat resistant.
Chrome
Nickel
20
80
PAC 118W
Metco Spray Bond Tafa 13T
Coating is beneficial for repair and salvage of automotive cracked blocks, heads and similar castings, mold patterns and latheways.
Molybdenum
99.0 Min.
PAC 67W
Coating is dense, little to no porosity and low oxide content. Excellent for fretting wear applications.
Copper
Iron
Nickel
Balance
0.55
30.5
PAC 90W
Tafa TWX106
Coating is identical in chemistry to Stellite 31. A cobalt base alloy having a very good stress rupture, endurance and creep properties. Good for oxidizing and reducing atmospheres to 2100 degrees Fahrenheit.
Carbon
Chromium
Cobalt
Nickel
Tungsten
0.5
25.5
Balance
10.5
7.5
PAC 30W
Tafa 30T
Mild Steel, Copper Coated
AWSE70S-6
PAC 16W
Metco Spray Bronze AA Tafa 10T
Coating can be used as a bearing surface with excellent resistance to fretting, cavitational wear and for salvage and build up of brass and bronze surfaces.
Aluminum
Copper
Iron
10
Balance
1.5
PAC A13
Metco Silvaloy A30 Tafa 30S
Coating can be easily machined. Used for aircraft engine seals.
Copper
Silver
Zink
38
30
32
PAC 10W
Metco Copper Tafa 05T
Coating can replace brazing. Used in electrical applications.
Copper
98.0 Min.
PAC 1100W
Metco Aluminum
Exhibits excellent electrical and heat conductivity. Produces dense, corrosion and oxidation resistant coatings.
Aluminum
99.0 Min.
PAC 4043W
Metco Aluminum SF Tafa OIS
Coatings are harder and slightly denser than PAC 1100W coatings. Used for repair of worn of mismachined Aluminum or Magnesium substrates.
Aluminum
Silicon
Balance
5.25